Kustom KPC4P User Manual

5. LINE Input: This ¼-inch unbalanced input (mono / stereo mixed) may be used to connect a line
level signal, high-impedance microphone, keyboard, drum machine or other audio devices.
4. MIC Input: This XLR input is designed for low-impedance microphones or equipment that has a
Mic-level, balanced output. This input is not intended for line level signals, as distortion may occur.
2. Volume: This control adjusts the volume level of the unit.
3. Thru: This XLR Jack is used to pass a signal from the Mic Input of the KPC4P to another device
such as a mixer or powered speaker. If connected to a mixer with phantom power, the phantom power
passes through to the mic input and can supply power to a condenser microphone.
1. Power: This switch activates AC power to the powered PA.
6. AC Power Cord Receptacle: Insert the KPC4P’s AC cord rmly into the AC receptacle. Be sure to
use the cable provided with your KPC4P. The power cord can be removed for storage or replacement
if damaged. Note: Replace the AC cord if its protective jacket is damaged or ground pin is damaged
or removed.
CONTROLS & FEATURES OVERVIEW:
2. Volume
5. Line Input
3. Thru 4. Mic Input
6. AC Power Cord Receptacle
1. Power

Kustom KPC4P Specifications

General

Brand	Kustom
Model	KPC4P
Category	Speakers
Language	English