EasyManuals Logo
Home>KYMCO>Scooter>Compagno 50i

KYMCO Compagno 50i User Manual

KYMCO Compagno 50i
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
25
MAINTENANCE
Reinstall the drain plug and tighten it to the
specified torque.
4.
Add oil to the engine per the amounts listed
below, and reinstall the oil filler/dipstick.
5.
Engine oil capacity: 0.9 Us qt (0.85 L)
NOTE: Amounts are after draining the oil
only.
Start the engine and let it idle for 2 - 3 minutes.
6.
Stop the engine and check the oil level on the
dipstick when the scooter is parked by the
center stand, on level ground.
7.
Adjust the oil level as required (so the level
reaches the upper mark on the dipstick).
Replace the dipstick and inspect for any leaks.
8.
CAUTION
Running the engine with insufficient oil pressure
can cause serious engine damage.
Remove the oil drain plug from the crankcase
to drain the oil.
3.
Engine oil exchanging capacity:
0.74 Us qt (0.7 L)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO Compagno 50i and is the answer not in the manual?

KYMCO Compagno 50i Specifications

General IconGeneral
BrandKYMCO
ModelCompagno 50i
CategoryScooter
LanguageEnglish

Related product manuals