30
MAINTENANCE
Your scooter requires the proper brake lever free-
play so the brakes will be responsive and will not
drag, causing premature wear to the brake pads.
Brake inspection
The free-play is the measured distance between
the brake lever at rest and a fully applied brake.
Measure the free-play and the brake lever end
0.4 - 0.6 in (10 - 20 mm).
1.
Use the cable adjuster on rear brake lever perch
for minor free play adjustment.
2.
To perform free play adjustment outside of the
range of the cable adjusters on the brake lever
perches, use the adjuster nut at the end of the
brake cable where it connects to the brake arm.
3.
NOTE: Before adjusting the free play with the
brake arm adjuster nut, turn the adjusters on the
brake lever perches as far as they will turn in a
clockwise direction.
Rotating the adjuster nut clockwise reduces
the clutch lever free play. Rotating the adjuster
nut counterclockwise increases the clutch
lever play.
4.
0.4 -0.6 in (10-20 mm)
To Next Page
Loading...
Need help?
General