SECTION 3 -
OPERATION
Pre-ride inspection
For your safety, it is very important to take a few
moments before each ride to walk around your
scooter and check its condition. If you detect any
problem, be sure to address it immediately, or have
it corrected by your KYMCO dealer.
Engine oil level: Add engine oil if required (page
29). Check for leaks.
Fuel level: Fill fuel tank when necessary (page
17). Check for leaks.
Front and rear brakes: Check operation, make
sure there is no brake fluid leakage (page 38).
Tires: Check condition and inflation pressure
(page 41).
Throttle: Check for smooth operation and that it
closes completely in all steering positions (page
33).
Lights and horn: Check that headlight, tail/brake
light, turn signals, indicators and horn function
properly.
Steering: Check for condition and smoothness.
1.
2.
3.
4.
5.
6.
7.
21
WARNING
Improperly maintaining your scooter or failing to
correct a problem before riding can cause a
crash in which you can be seriously hurt or killed.
Always perform a pre-ride inspection before
every ride and correct any problems.
To Next Page
Loading...
Need help?
General