30
Driving the scooter
Operation indicator and fault display
Operation indicator on :
the Scooter is switched on and ready for driving.
Operation indicator blinking :
please contact your supplier.
Operation indicator
Adjusting the speed
NOTE:
Use the adjustment facilities to adjust the speed to suit
local conditions.
Select a lower speed if you are driving through narrow
gaps, on inclines or through crowds.
Preselecting the drive level
You can use the drive level selection switch to set the maximum
driving speed.
Drive levels:
H(High) = 12.8 kph (8 mph) maximum driving speed
L(Low) = 6.4 kph (4 mph) maximum driving speed
Move the Hi/Lo speed switch to setting
H or L to adjust the required maximum
driving speed.
To Next Page
Loading...
Need help?
General
