(3) BRAKE INSPECTION
Ride the motorcycle at low speed on a dry road and
respectively apply the front and rear brakes to check
the brake performance.
The brake lever should have proper free play.
"Free play" means the distance from the position of loose
brake to the position of fully applied brake.
Measure the free play at the brake lever end and check if it
is within the specified value of (10~20 mm front brake)
(10~20 mm rear brake).
(4) TIRE INSPECTION
1. Tire Pressure Check
Check if the tire pressure is normal when the tire is in
contact with level ground.
If there is any abnormal condition, check the tire pressure
with a tire pressure gauge.
Measure the tire pressure under room temperature.
10~20mm
10~20mm
70
50
30
40
60
80
20
10
21