KYMCO UXV 450i User Manual

Maintenance And Lubrication
Battery Remove
1. Make sure the ignition switch is OFF.
2. Remove the seat.
3. Remove the battery cover.
4. Disconnect the negative (
-) terminal lead
(1) from the battery first, then disconnect
the positive (+) terminal lead (2).
5. Remove the battery.
Battery installation
1. Install in the reverse order of removal.
2. After installing the battery, check if the
battery cables are routed correctly.
NOTE:
First connect the positive (+) cable and then
negative (-) cable to avoid short circuit.
62
(1)
(2)

KYMCO UXV 450i Specifications

General

Brand	KYMCO
Model	UXV 450i
Category	Offroad Vehicle
Language	English