KYMCO UXV500 4x4 User Manual

Maintenance And Lubrication
Fuse Replacement
The fuse box stored in the battery compartment.
To replace a fuse:
1. Make sure the ignition switch is OFF.
2. Remove the under-hood hook& pu bolts
3. Open the fuse box cap.
4. Pull the old fuse out of the fuse holder.
5. Push the new fuse in to the fuse holder.
6. Close the fuse box cap and install seat.
To prevent accidental short-circuiting, turn
off the main switch when checking or
replacing a fuse.
CAUTION:
66
(1) (2) (3) (4) (5) (6)
(6)FAN MOTER---------15A
(5)IGNITION--------------15A
(4)LIGHT------------------15A
(3)DC12VPOWER------15A
(2)SPARE-----------------15A
(1)SPARE-----------------30A

KYMCO UXV500 4x4 Specifications

General

Brand	KYMCO
Model	UXV500 4x4
Category	Offroad Vehicle
Language	English