EasyManuals Logo
Home>Kyocera>Printer>Ecosys FS-1320D

Kyocera Ecosys FS-1320D Operation Guide

Kyocera Ecosys FS-1320D
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
xvi
Precautions for Use
Cautions when using the machine
Warning
Do not place metallic objects or containers with water (flower
vases, flower pots, cups, etc.) on or near the machine. This
situation presents a danger of fire or electrical shock should they
fall inside.
Do not remove any of the covers from the machine as there is a
danger of electrical shock from high voltage parts inside the
machine.
Do not damage, break or attempt to repair the power cord. Do not
place heavy objects on the cord, pull it, bend it unnecessarily or
cause any other type of damage. These types of situations
present a danger of fire or electrical shock.
Never attempt to repair or disassemble the machine or its parts as
there is a danger of fire, electrical shock or damage to the laser. If
the laser beam escapes, there is a danger of it causing blindness.
If the machine becomes excessively hot, smoke appears from the
machine, there is an odd smell, or any other abnormal situation
occurs, there is a danger of fire or electrical shock. Turn the main
power switch off ({) immediately, be absolutely certain to remove the
power plug from the outlet and then contact your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into
the machine, turn the main power switch off ({) immediately.
Next, be absolutely certain to remove the power plug from the
outlet to avoid the danger of fire or electrical shock. Then contact your
service representative.
Do not remove or connect the power plug with wet hands, as
there is a danger of electrical shock.
Always contact your service representative for maintenance or
repair of internal parts.
Caution
Do not pull the power cord when removing it from the outlet. If the
power cord is pulled, the wires may become broken and there is a
danger of fire or electrical shock. (Always grasp the power plug
when removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the
machine. If the power cord is damaged, there is a danger of fire or
electrical shock.
If the machine will not be used for a short period of time
(overnight, etc.), turn the power switch off (O). If it will not be used
for an extended period of time (vacations, etc.), remove the power
plug from the outlet for safety purposes during the time the machine is
not in use..
Always hold the designated parts only when lifting or moving the
machine.
For safety purposes, always remove the power plug from the
outlet when performing cleaning operations.

Table of Contents

Other manuals for Kyocera Ecosys FS-1320D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera Ecosys FS-1320D and is the answer not in the manual?

Kyocera Ecosys FS-1320D Specifications

General IconGeneral
Ethernet LANNo
Network readyYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)7 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Printing colorsBlack
Maximum duty cycle50000 pages per month
Number of print cartridges1
Page description languagesIBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model405F5
Processor familyPowerPC
Maximum internal memory544 MB
DisplayLED
CertificationTÜV/GS, CE, PTS, C-Tick
Total input capacity250 sheets
Maximum input capacity800 sheets
Maximum number of input trays3
Multi-Purpose tray input capacity50 sheets
Custom media width70 - 215.9 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Duplex media weight60 - 105 g/m²
Paper tray media typesPlain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Standard interfacesUSB 2.0
Optional connectivityEthernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)7.2 W
Power consumption (printing)544 W
Power consumption (PowerSave)4.3 W
Media thickness0.11 mm
Compatible operating systemsWindows OS Linux OS Unix OS Mac OS X 10.2+
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)375 x 393 x 250 mm

Related product manuals