2PK/2PL/2PM/2PN
1-3-6
(3) Contents of the maintenance mode items
Item No. Description
U000 Outputting an maintenance report
Description
Outputs lists of the current settings of the maintenance items and paper jam and service call
occurrences. Outputs the event log. Also sends output data to the USB memory.
Printing a report is disabled either when a job is remaining in the buffer or when [Pause All Print
Jobs] is pressed to halt printing.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output using the cursor up/down keys.
3. Press the start key. A list is output.
Method: Send to the USB memory
1. Turn the power switch off.
2. Insert USB memory in USB memory slot.
3. Turn the power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [TEXT] or [HTML].
8. Press the start key.
Output will be sent to the USB memory.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display Output list
MAINTENANCE List of the current settings of the maintenance modes
EVENT Outputs the event log
ALL Outputs the all reports
Display Output list
Print Outputs the report
USB (TEXT) Sends output data to the USB memory (text type)
USB (HTML) Sends output data to the USB memory (HTML type)