8-32
Setup and Registration (System Menu) > System Menu
WeeklyTimer Set. Configure settings for switching the machine to OFF and waking it automatically at a specified
time for each day of the week.
Weekly Timer Select whether to use Weekly Timer.
Value: Off, On
Schedule Specify the time for each day of the week at which the machine turns OFF.
Retry Settings
－
Limited Retries Select whether to limit the numbers of retries for turning OFF this machine.
Value: On, Off
Retry Times If you select [On] for Limited Retries, set the number of retries for turning OFF this machine.
Value: 0 to 10 times
Retry Interval Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (increments of 10 seconds)
Power Off Rule (models for
Europe)
Select whether or not the machine enters Power Off mode for the following function. Select
[On] to set the Power Off mode.
•Network
•FAX
*3
• USB Cable
• USB Host
• RAM Disk
•NIC
*4
• Remote Diag.
Even when any of the functions is set to [On], if [FAX] is set to [Off], the machine does not
enter Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with
the other devices, the machine will enter Power Off Mode.
Power Off Timer (models for
Europe)
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day, 2
days, 3 days, 4 days, 5 days, 6 days, 1 week
Auto Err. Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
Err. Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [Auto Err. Clear] is set to [On].
Unusable Time
FAX Operation Guide
Ping Timeout
*3
Set the time until timeout occurs when [Ping] is executed in "System/Network".
Value: 1 to 30 seconds (in 1 second increments)
*1 When the optional Network Interface Kit is installed, this is not displayed.
*2 Displayed only when the optional Card Authentication Kit is activated.
*3 Only on products with the fax function installed.
*4 Displayed only when the optional Network Interface Kit is installed.
Item Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
