11-7
Appendix > Optional Equipment
Optional Function
The applications listed below are installed on this machine.
Starting Application Use
Use the procedure below to start using an application.
1 [Menu] > [▲] [▼] key > [Op Functions] > [OK] key
2 Select the desired application, and select the [OK] key.
3 [▲] [▼] key > [License On] > [OK] key
4 [▲] [▼] key > [Official] > [OK] key
To use the application as a trial, select [Trial] without entering the license key.
5 Enter the license key > [OK] key
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to Step 6.
6 Select [Yes].
Application
Data Encryption (Data Encryption/Overwrite)
UG-33 (ThinPrint Option)
*1
*1 This can be used on a trial basis for a limited time.
ID Card (Card Authentication Kit)
*1
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: ECOSYS P3145dn: 4500 ECOSYS P3150dn: 5000
ECOSYS P3155dn: 5500
Login Password: ECOSYS P3145dn: 4500 ECOSYS P3150dn: 5000
ECOSYS P3155dn: 5500
You can view detailed information on the selected application by selecting [Detail].
If you started the Data Encryption/Overwrite or Thin Print option, turn the power OFF/
ON.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
