2P7/2R0/3PN
1-5-19
6. Remove the connector.
7. Release the lock lever and then remove
the developer unit upward.
Figure 1-5-33
8. Remove the lock lever L.
9. Remove the lock lever R by sliding
backward.
10. Remove the drum unit by sliding for-
ward.
11. Check or replace the drum unit and refit
all the removed parts.
Figure 1-5-34
Developer unit
Connector
Lock lever
Lock
lever L
Lock
lever R
Hook
Drum unit
To Next Page
Loading...
Need help?
General