2P7/2R0/3PN
1-5-52
16. Unplug the power cable.
*: Do not insert or remove main PWB
assembly while machine power is on.
Doing so may cause damage to the
machine and the main PWB.
17. Remove five screws and then pull the
main PWB assembly out forward.
Figure 1-5-95
18. Release the wires and FFC from hooks.
19. Release the fixing hook and thenre-
move the wire guide.
Figure 1-5-96
Screw
Screw
Screw
Screw
Main PWB assembly
Screw
Wire guide
Fixing hook
Hook
FFC
Hooks
Wire
To Next Page
Loading...
Need help?
General