2P7/2R0/3PN
1-5-84
3. Release three hooks and then remove
the rear lower cover while pulling three
projection parts out.
Figure 1-5-154
4. Remove the seven screws and the rear
upper cover.
5. remove the connector of the fan motor
wires.
6. Remove the rear fan motor/
7. Check or replace the rear fan motor and
refit all the removed parts.
Figure 1-5-155
Hooks
Rear lower cover
Projection parts
Rear upper
cover
Screw
Rear
fan motor
Rear upper cover
Connector
Fan motor
wires
Screw
Screw
Screw
Screw
Screw
Screw
To Next Page
Loading...
Need help?
General