Kyocera KM-3050 Changes To The Manual

Default Screen
The following options are added to the selection for the screen appearing right after start-up (default
screen). (Refer to page 2-31 in the Operation Guide or page 6-3 in the Advanced Operation Guide.)
Orientation Confirmation
Select whether to display a screen for selecting the orientation of the originals to be placed on the
platen when using the following functions. (For more information, refer to page 1-10 in the Advanced
Operation Guide.)
•Duplex
• Margin/Centering originals
• Border erase
• Combine mode
• Memo mode
• Page numbering
• Booklets
• Stapling/Punching (optional feature)
* If [On] is selected as the Orientation Confirmation setting, the selection screen for original
orientation appears when you select any of the above functions.
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].
Registering Programs
Steps 2 to 5 are changed as below. (Refer to page 1-59 in the Advanced Operation Guide.)
2
Press [Register] and press a number (01 to 50) for the program number. If entering Program screen
from the Copy screen or Send screen, go to step 4.
3
Check that [Copy] is selected and press [Next].
4
Enter the new program name and press [Register] to register the program.
Item Description
Application The Application screen (the screen shown when the
Application key is pressed) appears.
Accessibility Copy The Accessibility Copy screen (the screen shown when the
Accessibility Display key is pressed in the Copy screen)
appears.
Accessibility Send The Accessibility Send screen (the screen shown when the
Accessibility Display key is pressed in the Send screen)
appears.
3
Registering Shortcuts
The explanation is changed as below. (Refer to page 1-61 in the Advanced Operation Guide.)
Add shortcuts to the Quick Setup screen as a quick and easy way to access frequently used functions.
Function names linked to registered shortcuts can be changed as necessary.
You can register shortcuts for up to 5 copying functions and up to 6 sending functions.
Adding Shortcuts
Steps 3 to 4 are changed as below. (Refer to page 1-61 in the Advanced Operation Guide.)
3
Enter the shortcut name and press [Register] to add the shortcut. Press [Close].
Output Tray
Step 3 is changed as below. (Refer to page 6-19 in the Advanced Operation Guide.)
3
Press [Change] of Copy/Custom Box, Printer, FAX Port 1 or FAX Port 2.
NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits
installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX).
Paper Selection
Step 3 is changed as below. (Refer to page 1-6 in the Advanced Operation Guide.)
3
Press [Org./Paper/Finishing], [Paper Selection] and then [MP Tray Setting].
4

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs