391.7(L)×151.5(W)×41.7(H)±2
BASIC INFORMATION
FUNCTION KEYS, TOGGLE SWITCH, DISPLAY OPERATION
TOGGLE SWITCH FUNCTION
RESET KEYBOARD WITH SIDE WING
BLUETOOTH CONNECTIVITY
94keysRGB Mechanical switch
USB/2.4G/BT
USBReceiver slot
Type-c
Push Switch: Press and hold for 5
seconds to turn it ON/OFF. Short Press for“OK”
Toggle switch
(On Home Screen,toggle up to switch keyboard
connection mode/device easily)
有线模式
Toggle down once
GIF animation
Toggle down twice
setting menu
Toggle up once
switch mode easily
CAPSLOCK
Bcklight Effect/Colour Settings
GIF animation displayed on screen when powering on
Backlight brightness/speed setting
1.Select the effect icon and press“OK".
Use the toggle switch to choose different backlight effects.
1.Select the Brightness icon and press“OK”.
Use the toggle switch to adjust backlight brightness.
2.Select the Speed icon and press“OK”.
Use the toggle switch to adjust backlight effect speed.
Layout switching: Win/Mac
Volume adjustment
Language selection: English/Chinese
2.Select the colour icon and press“OK”.
Use the toggle switch to choose different backlight colour.
（This also supports color selection for backlit recording）
Num
WIN Lock
WIN systems
Mac systems
Wired mode
2.4G
BT
Pressing FN+Win locks the WIN key and APP key functions.
Press and hold FN+ spacebar for 3 seconds to restore factory settings.
Remove the right side wing.
Touch the two points of stickers for
restoring factory settings.（wireless mode only)
Sticker on side wing
Sticker on keyboard
2.4G CONNECTIVITY
1.Use the toggle to select BT1/BT2/BT3 icon，and connect any group of Bluetooth.
Pairing setting：for example，select BT1，then press and hold “OK”until it shows BT1 is paring，
which means that the pairing is in progress.
Re-connection setting: for example, select BT1, then click ‘OK’, and it shows BT1 is linking,
which means that you have entered the reconnect state.
2. Turn on the bluetooth settings of your device,then search and connect“Kzzi Z98”
3. Once it's done, the display shows “BT1 success!” and back to the Home Screen.
Similarly, follow the steps above to store 3 groups of different BT devices.
2.4G mode: use the toggle to select the 2.4G icon， and click the Push Switch. Keyboard switches to 2.4G
mode and the display shows "2.4G linking".
2.4G pairing: use the toggle switch to select the 2.4G icon,and press and hold the Push Switch until the display shows "2.4G pairing";
then insert receiver,and the display shows "2.4G success" .
(Kind Reminder: The receiver has been paired before delivery, no need to pair 2.4G again; This method is only used when 2.4G
cannot be connected, you can set it for the first time, no need to set it every time)
(Kind Reminder: please store 3 groups of BT device before switching. )
Receiver storage compartment
折线位置
折线位置
折线位置
To Next Page
Need help?
General
