ARCS
ARCSARCS
ARCS
®
II
IIII
II
SYSTEM
SYSTEMSYSTEM
SYSTEM
USER
USERUSER
USER
MANUAL
MANUALMANUAL
MANUAL
VERSION 1.2
ARCSII_UM_EN_1-2
w w w . l - a c o u s t i c s . c o m
4
44
4
2
22
2
SYSTEM
SYSTEMSYSTEM
SYSTEM
COMPONENTS
COMPONENTSCOMPONENTS
COMPONENTS
The system approach developed by L-ACOUSTICS
®
consists in offering a global solution that guarantee the highest and
most predictable level of performance at any step of loudspeaker system deployment: modeling, installation and
operation. A complete L-ACOUSTICS
®
system includes enclosures, amplified controllers, cables, rigging system and
software applications. The main components of an ARCS
®
II SYSTEM are the following:
2.1 Loudspeaker enclosures
Loudspeaker system design
Sound design aspects are beyond the scope of this document. However, the various applications of the
system will be based on the operating modes presented in this document.
2.2 Powering and driving system
Amplified controller with DSP libr
ary and networking capabilities
Touring rack containing three LA8
audio signals and network
Refer to the LA8 and the LA-RAK user manual.
2.3 Loudspeaker cables
respective lengths of 0.7m/2.3ft, 10m/32.8ft, and 25m/82ft
PA-COM
®
< 2 x SpeakON
®
way active enclosure and two passive enclosures
PA-COM
®
< 3 x SpeakON
®
for four passive enclosures
PA-COM
®
< 4 x SpeakON
®
SP cables (SP.7, SP5, SP10, SP25
respective lengths of 0.7m/2.3ft, 5m/16.4ft, 10m/32.8ft and 25m/82ft
Breakout cable for two passive enclosure
SpeakON
®
< 2 x SpeakON
®
rmation about the connection of the
Refer to the LA8 and the LA-RAK user manual for detailed instructions about the whole cabling scheme,
including modulation cables and network.
2.4 Rigging elements
Rigging elements or procedures are not presented in this document.
Refer to the ARCS
®
II SYSTEM rigging manual.
2.5 Software applications
3D acoustical and mechanical modeling
Refer to the SOUNDVISION user manual and the LA NETWORK MANAGER tutorial.