Labcold IntelliCold RLDG 19 Series User Manual

3
IntelliCold® Controller
Before plugging in your Labcold refrigerator for the rst time make sure the power cable is free
from damage and check that your voltage corresponds to that on the serial plate.
It is recommended that you do not use extension cords or multiple socket adapters. Make sure
the power cable is not bent, pinched or compressed and that it can be easily accessed.
When you rst plug your refrigerator in it will sound and all the icons/buttons will be illuminated.
°
°
t
t
°
1
2
C
H/L
P
4
Plug In and Switch On
Setting the Date and Time
This needs to be done as soon as the refrigerator is plugged in. Your fridge does not have a
GPRS/wireless connection, so this will need to be repeated if the refrigerator experiences a
power loss and no batteries are tted. We recommend tting batteries to the fridge so it will
alarm and record internal temperatures should it become disconnected from a mains power
source.
 The time should NOT be changed when the clocks change to GMT or BST as this may
cause stored data loss.
To set the date you need to do the following:
The IntelliCold® controller tted to the front of your refrigerator has been designed by Labcold
for the safe storage of vaccines, medicines and laboratory products.
It is tted with an exclusive touch controller that displays the temperature detected by two
temperature probes, one located in the back of the fridge and one you can position yourself
within the fridge.
Unlike other refrigerator controllers which have buttons you can press with your nger, this
one responds to the electrical current in your skin like a mobile phone or tablet. When you
place your hand over the controller it will reveal the various icons/buttons allowing you to
access dierent functions.
 Like a mobile phone screen it may not work if you’re wearing gloves.
Where the instructions say ‘touch’ this means tap the icon/button like you would an app
on your phone. ‘Hold’ means leave your nger on the icon/button. The controller sounds to
conrm it has registered your touch, again similar to a mobile.
High /Low
Touch to view
minimum/maximum
temperatures
Tick
Touch to select
menu option and
hold to conrm
adjustments
Mute
Touch to mute
alarms, cancel
adjustment or go
back in the menu
Light
Touch to turn the
light on
Slot for
Micro SD Card
Visual Alarm
This red light displays
when the refrigerator is in
an alarm state. It remains
on as long as the alarm
conditions continue
regardless of whether the
alarm is muted
Battery Alarm
Up/Down Arrows
Use to scroll through menu
and hold simultaneously to
access menu
t1 and t2
Indicates which probe
the temperature
displayed relates to
Temperature
Scale
H/L
P
H/L
P
The controller will ash Y followed by 2 digits, for example Y98. Use the up and down arrows
on the right hand side to adjust to the current year, so if it is 2019 adjust the digits to 19. If
you hold the arrow it will scroll through the numbers, if you touch the arrow(s) the value will
increase/decrease by one unit at a time. When the controller is showing the correct year, touch
the tick icon/button and it will store that setting and then ask you to set the month.
The controller will now ash  followed by 2 digits, for example 98. Adjust the digits using
the arrow icons/buttons as above, so if it is June adjust the digits to 06. When adjusted, touch
the tick icon/button as before.
H/L
P
H/L
P

Labcold IntelliCold RLDG 19 Series Specifications

General

Brand	Labcold
Model	IntelliCold RLDG 19 Series
Category	Refrigerator
Language	English