To Next Page
L
lanemichelleAug 15, 2025
Why is my Labconco Dishwasher not drying properly?
- JJohn GrahamAug 15, 2025
Poor drying results from several potential issues. The drying temperature might be too low, so you should program a warmer drying temperature. Improper loading of flasks, beakers, or labware can also cause this; ensure these items are tilted to allow water to drain. Recondensation can occur, so open the latch after the cycle to let moisture escape. Other causes include disconnected or malfunctioning heaters or blowers (reconnect or replace them, respectively), dry time being too short (program a longer time), or a temperature sensor that is out of calibration (verify the displayed temperature with a thermocouple; if it differs by more than ±4°C, contact Labconco Product Services).
General