Instruction manual for CoolSafe
Item No. 700749
CopyRight © 2017
In the third step, water that is strongly bound to the solids of the sample (called sobbed
water) is converted to vapour and removed from the product, this process being referred to
as de-sorption. Removing moisture in the de-sorption phase or secondary drying phase, is
done at a higher product temperature and at the lowest possible pressure
8 Technical Specifications
8.1 CoolSafe -55 °C
CoolSafe Basic or Pro 55-4
Digital read-out of temperature
Digital read-out of pressure
Ultimate temperature at 20°C room temperature
Condenser capacity per 24 hours
Total volume of Condenser
Cabinet dimensions (DxWxH)
CoolSafe Basic or Pro 55-9
Digital read-out of temperature
Digital read-out of pressure
Ultimate temperature at 20°C room temperature
Condenser capacity per 24 hours
Total volume of Condenser
Cabinet dimensions (DxWxH)
To Next Page
Loading...
Need help?
General
