Lad Weather Sensor Master III User Manual

Functional Display
- The Barometer Mode includes 3 kinds of
Functional display:
- Current Temperature Display
- Sea Level Pressure Display
- Sea Pressure Chart Display
- Press and hold [S/S] to select Temperature / Baro
Unit:
Sea Pressure History Display
- The watch records the sea pressure in every hour
- In Sea Pressure Chart display, press [L/R] to enter
Sea pressure history display.
- Press [L/R] to move cursor left cyclically, then the
respective pressure record will appear on the
display
Note: If you want to have an accurate reading of air
temperature, you must remove the watch form the
wrist ( for 20 - 30 minutes ) that allows no body
temperature effect on your watch.
Trip Point Data
- The watch will record Absolute Altitude, Lap Step, Lap Distance, Lap Time, Lap
Calories Burnt and Lap Average Speed in each Trip Point Data.
- In Total Trip Point data view: Total Step, Total Traveled Distance, Total Calories Burnt,
Total Traveled Time, Total Average Speed and Final Trip Point Altitude.
Trip Point Data
- In Trip point data view, press [S/S] to recall the recorded trip point and
total Trip point data.
- In each Trip point data view, press [L/R] to select between Lap Step /
Lap Distance / Lap Calories view
Trip Point Data
- In Total Trip point data view, press [L/R] to select between Total Step / Total Distance / Total
Calories view
- Press [M] to exit Total trip point data view
- Press and hold [M] to exit trip recall mode
6.4.0 Trip Mode - Trip Record Recall ( Trip Point Data )
6.4.1 Trip Mode - Trip Record Recall ( Trip Point Data )
6.5 Trip Mode - Trip Record Recall ( Trip Total Data )
7.0 Barometer Mode- Function Display
No. of
Point
Altitude
Lap Step View Lap Distance View Lap Calories View
Lap Time
Lap Avg. Speed
Trip Record
Trip Point Data view
[S/S] [M]
[L/R]
[L/R]
[L/R]
Altitude
Progress of
Step goal
Progress of
Distance goal
Progress of
Calories
Burnt goal
Total
Step View
Total
Distance View
Total
Calories Burnt
View
Total Time
Total Avg. Speed
Trip Total Data view
[L/R]
[L/R]
[L/R]
[S/S]
Total
Trip
Point
Data
Trip
Point
1
Trip
Point
2
....
Barometer Mode
Current
Pressure
Current
Temperature
Flashing
Current
Time
Current Temperature display
Sea Level
Pressure
[S/S]
[L/R]
[S/S]
[S/S] [S/S]
Functional Display
Sea Pressure
Chart
Sea Pressure History Display
Last 23hr record
cursor moving direction
[L/R]
inHg inHg
Trip
Point
Trip
Point
Trip
Point
Trip
Point
Hold [L/R]
Trip Point 1
Save
[S/S]
Start
Hold [L/R]
Trip Point 2
Save
Hold [L/R]
Trip Point 3
Save
Hold [L/R]
Trip Point 4
Save
[S/S]
Stop

Lad Weather Sensor Master III Specifications

Sensor Specifications

barometer resolution/measuring range	300 hPa/mbar to 1100 hPa/mbar (8.85 inHg to 32.48 inHg)
thermometer resolution	0.1 ˚C (0.1˚F)
thermometer measuring range	-10.0 ˚C to 60.0 ˚C (14.0 ˚F to 140.0 ˚F)
compass resolution	16 display (digital)
compass measuring range	0˚ to 359˚ (digital)
declination setting range	+90˚ to -90˚

Battery

battery type	3V lithium battery (CR2032)
battery quantity	1 piece

Trip Mode Specifications

pedometer step range	0-99999
distance measurement max	99 km
speed measurement max	65 km/h
altimeter resolution	1m (1ft)
altimeter measuring range	-706m to 9164m (-2316ft to 30067ft)