04
III. INSTALLATION INSTRUCTIONS
THE OPERATION PROCESS SHOULD BE HANDLED LIGHTLY
TO AVOID PRODUCT BRUISES AND SCRATCHES.
!
Step 1: Remove the device and its accessories from its packaging box.
Step 2: Take out the adapter, litter drainage footstep, and 1 roll of waste bag from the
accesso box .
Step 3: Take one piece of bag from bag roll and place the balance into the roll holder at the
front of the trash bin.
Step 4: Release the u-shaped strip and movable bar by unwrap the lm wrapped on the
edge of trash bin. Spread out the bag edge alongside the rim of the bin. Clip the
front side with u-shaped strip and clip the other side by the foldable clip of the
movable bar.
INSTALLING THE WASTE BAG:
1 2
3
6
4 5
1 2
3
Ensure that when placing the waste bag in the
front-end trash bin, the bag should not cover the
clasps of the u-shaped strips on both sides.
Scan the QR code to watch the Instruction videos.
Instruction videos