Lantronix DSTni-XPress DR User Manual

900-289 Rev B
DSTni-XPress DR Quick Start
DSTni-XPress DR/DR-IAP
DSTni-XPress DR and DSTni-XPress DR-IAP are
members of the Lantronix family of Device Servers.
DSTni-XPress DR-IAP devices allow you to install the
protocol suitable for your automation application.
When you complete the setup, you can Ethernet-enable a
serial device by connecting it to the serial port. (See the
DSTni-XPress DR User Guide on the software CD.)
Quick Connect
Screw Terminals for
RS-232 and RS-485/422
RJ45 Serial Port
RS-232 & RS-422/485
RS-232 or RS-485/422
Select Switch
Screw Terminals for
9-30VDC or 9-24VAC
RJ45 10/100BASE-T
Ethernet Port
Status LEDs
Reset Switch
Transmit Active LED
& Receive Active LED
RESET
10/100BASE-T
SERIAL
RS232
RS485
FR
AL
Ethernet
Serial
1. Connect the XPress DR to the network through the
Ethernet port. (The unit must be on the same network
as your computer.)
2. Connect power (9-30VDC or 9-24VAC).
19 20
21 22
GND
GND
9-30VDC
DC+
DC-
9-24VAC
3. Verify that the green Link LED is lit.
Setup
Follow these steps to quickly setup the device.
Step 1: Start DeviceInstaller
1. Insert the software CD into your CD-ROM drive.
When the main window appears, click the Device
Installer button and follow the instructions on the
screen.
2. Click the Start button, and then point to Programs.
Point to the folder that contains Device Installer, then
click Device Installer. The Device Installer main
window will appear.
Step 2: Assign an IP Address
1. Click the Assign IP icon.
The Assign IP
Address window displays.
2. In the Enter the Hardware or Ethernet Address
field, type the Ethernet address (MAC address) listed
on the Device Server label (on the right side of the
unit).
3. In the Enter IP Address to assign field, type the IP
address of the Device Server (xxx.xxx.xxx.xxx
format). Select a PC Network Class.
4. Click the Set IP Address button. The Assign IP
Successful message displays. Click OK.
Step 3: Search the Network
1. Click the Search Network icon
. The Search
Network window displays.
2. Click the Start Search button. The message Response
from xxx.xxx.xxx.xxx appears in the window. Click the
Save button and a device saved message appears. Click
OK then the Back button. The IP Address and
Hardware Address appear in the window.

Lantronix DSTni-XPress DR Specifications

General

Brand	Lantronix
Model	DSTni-XPress DR
Category	Server
Language	English