6) Current to be injected for different test
6.1 Basic Specification
6.2 Additional Specification ( only for UNRS 3 and SR 71)
6.2.1 View records : Maximum last 10 records can be viewed.
6.2.2 Reset release password : Testkit has a provision to reset release’s password to
default factory password 0000.
6.2.3 Download trip records : Release trip records can be downloaded in test kit by
this command.
6.2.4 Data Recovery : This command is helpful to recover the actual settings of the
release in case of communication link failure while writing settings to release.
Table: 1(ACB)
Note - Instantaneous above 10In not supported by test kit.
B
13
To Next Page
Need help?
General