EasyManuals Logo
Home>LaserLiner>Laser Level>DigiLevel Plus 25

LaserLiner DigiLevel Plus 25 User Manual

LaserLiner DigiLevel Plus 25
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
DigiLevel Plus
05
EN
Completely read through the operating instructions, the „Warranty and
Additional Information“ booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
!
Function / application
Digital electronic spirit level
– Horizontal and vertical angle display
The slope memory allows angles to be easily transferred.
General safety instructions
The device must only be used in accordance with its intended purpose and within
the scope of the specications.
The measuring tools and accessories are not toys. Keep out of reach of children.
Modications or changes to the device are not permitted, this will otherwise invalidate
the approval and safety specications.
Do not expose the device to mechanical stress, extreme temperatures,
moisture or signicant vibration.
The device must no longer be used if one or more of its functions fail or the battery
charge is weak.
Safety instructions
Dealing with electromagnetic radiation
The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive 2014/30/EU.
Local operating restrictions – for example, in hospitals, aircraft, petrol stations or
in the vicinity of people with pacemakers – may apply. Electronic devices can
potentially cause hazards or interference or be subject to hazards or interference.
The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating elds.
DigiLevel Plus
5
6
4
2
3
1
7 8 9 10 11
12 13
16
17 17
18
16
14
15
1 Change units of measure
2 Angle reference value setting
3 Calibration
4 ON/OFF button
5 Hold function
6 Acoustic signal generator /
Backlighting ON/OFF
7 Slope direction
8 Acoustic signal generator active
9 HOLD: current measured
value is held
10 Angle reference set
11 Battery charge
12 Slope angle
13 Units of measure
14 Horizontal vial
15 Vertical vial
16 Magnets
17 Measuring surface
18 Battery compartment (Rear)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLiner DigiLevel Plus 25 and is the answer not in the manual?

LaserLiner DigiLevel Plus 25 Specifications

General IconGeneral
BrandLaserLiner
ModelDigiLevel Plus 25
CategoryLaser Level
LanguageEnglish

Related product manuals