10
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014/A11:2021 / EN 50689-1:2021
General safety instructions
– The device must only be used in accordance with its intendedpurpose
and within the scope of the specications.
– Keep the measuring device away from children.
Keep out of reach of children.
– Modications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or signicant vibration.
– The device must no longer be used if one or more of its functions fail,
the battery charge is weak, or the housing has been damaged.
– When using the device outdoors, make sure that the weather conditions
are appropriate and/or that suitable protection measures are taken.
– Please ensure compliance with the safety regulations set out by local
and national authorities with regard to the correct and proper use of
the device.
Intended use
Completely read through the operating instructions, the
„Warranty and Additional Information“ booklet as well
as the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
These documents must be kept in a safe place and passed
on together with the product.
!
– Attention: Do not look into the direct or reected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars,...)
Safety instructions
Using class 2 lasers
Lengths, areas and volumes can be measured at a distance of up to
30 metres with this laser distance measuring device. The device is suitable
for continuous measurement and offers a choice of front or rear housing
reference points.
EN