LaserLiner LaserRange-Master i3 User Manual

LaserRange-Master i3
13
1x 2x 6x4x3x 5x
1x 2x 3x
Important notices
– The laser points to the location that will be measured.
No objects may get into the laser‘s line of measurement.
– The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
– The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
– The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
– In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3mm.
– Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
– Measurements made through glass (window panes) can falsify
measurement results.
– An energy-saving function switches the device off automatically.
– Clean with a soft cloth. Water may not be allowed to penetrate the
housing.
Min. measurement
The LC display shows the lowest value (min.) and the current value.
Max. measurement
The LC display shows the lowest value (max.) and the current value.
Min./max. measurement:
Min./max. Laser on Measure Stop
measurement
Volume measurement:
Volume 1. Measuring 2. Measuring 3. Measuring
EN

LaserLiner LaserRange-Master i3 Specifications

General

Wavelength	635 nm
Laser class	2
Measurement range	0.3 - 30 m
Measurement accuracy	± 0.002 m
Storage temperature (T-T)	-4 - 158 °F
Operating temperature (T-T)	-10 - 40 °C
Battery type	AAA
Auto power off	Yes
Battery voltage	1.5 V
Product color	Black

Weight and Dimensions

Weight	90 g
Dimensions (WxDxH)	40 x 24 x 110 mm