3.2 Specifications
1)
Screen: 2.8” TFT 262K true color, 320*240 QVGA LCD display
2)
Input voltage range: 8~32V
3)
Operating current: <100mA@12V (Typical)
4)
Power consumption: <1.2W (Typical)
5)
Operating temperature: 32°F~122°F / 0°C~50°C
6)
Storage tempetature: -4°F~158°F / -20°C ~70°C @ RH60%
7) Outline dimension: 4.7’*3.2’*1.0’ / 121*82*26 mm LWH
8) Weight : <17.6 oz (500g)
3.3 Power supply
The power of the Creader 319 is provided via the vehicle Data Link Connector
(DLC). Follow the steps below to power it up:
1)
Find DLC on vehicle
A plastic DLC cover may be found for some vehicles and you need to
remove it before plugging the OBDII cable.
2)
Plug the connector at the end of OBD II cable to the vehicle’s DLC.
3.4 Tool Setup
Select [Tool Setup] in the Main Menu and press [ok],the screen will display
the interface as shown below:
To Next Page
Loading...
Need help?
General
