12
LAUNCH
User Manual
4.3 Job Menu
It mainly includes the following function modules.
Diagnose
To configures the tool to operate as a professional diagnostic
tool.
I/M
A quick access to the I/M Readiness function of OBD II
Diagnosis. I/M refers to Inspection and Maintenance that
is legislated by the Government to meet federal clean-air
standards. I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating
properly and are ready for Inspection and Maintenance testing.
*Note: This function also can ďe Ěone ďy peƌfoƌŵinŐ ΗK //
;iaŐnosisͿΗ Ͳх Η/D ZeaĚinessΗ &oƌ ĚetaileĚ opeƌation please ƌefeƌ
to hapteƌ ϱϯ
OBD II
This option presents a quick way to check for DTCs, isolate
the cause of the illuminated Malfunction Indicator Lamp (MIL),
check monitor status prior to emissions certification testing,
verify repairs, and perform a number of other services that are
emission-related.
Battery
Voltage
Measures the current voltage of the vehicle’s battery.
Reset*
To perform common repair & maintenance items, including Oil
lamp reset, Electronic parking brake reset, Steering angle cali-
bration and Battery maintenance system reset.
*Note: This function only applies to the ƌeaĚeƌ Wƌofessional ϭϮϵi
Update
To update vehicle diagnostic software and APK.
*Note: This function ƌeƋuiƌes a staďle netǁoƌŬ connection
Data
Includes Diagnostic report, Diagnostic record, Feedback and
DTC library etc.
Settings
To make some system settings, including Network setup,
Email and Brightness etc.
To Next Page
Loading...
Need help?
General
