2
LAUNCH
Professional 909E User Manual
compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the
following:
1. Vehicle Emissions Control Information (VECI) Label. It is located under the
hood or by the radiator of most vehicles. If the vehicle is OBD II compliant,
the label will designate “OBD II Certied”.
2. Government regulations mandate that all OBD II compliant vehicles must
have a “common” 16-pin Data Link Connector (DLC).
Note: Some 1994 and 1995 vehicles have 16-pin connectors but are not
OBD II compliant. Only those vehicles with a Vehicle Emissions Control Label
stating “OBD II Certied” are OBD II compliant.
To Next Page
Loading...
Need help?
General
