MAINTENANCE
When servicing, use only identical replacement parts. Use of any other parts may create a hazard or
cause product damage.
Before inspecting, cleaning, or servicing the machine, shut off the engine, wait for all moving parts to
stop, and remove the battery pack. Failure to follow these instructions can result in serious personal
injury or property damage.
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with head
protection. Failure to do so could result in objects being thrown into your eyes and other possible
serious injuries.
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating lubricants, etc.,
come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which could
result in serious personal injury.
Normal maintenance, replacement or repair of emission control devices and systems may be
performed by an authorized service center or qualified individual that uses identical parts.
Warranty repairs must be performed by an authorized service center; please contact your service
dealer for assistance or Customer Service (Toll Free Number 866-384-8432).
NOTICE: Occasionally inspect the tool for damaged, missing, or loose parts such as screws, nuts,
bolts, caps, etc. Do not operate this tool if parts are damaged or missing. Secure all fasteners and
caps prior to using the tool. Please contact your service dealer for assistance or Customer Service
(Toll Free Number 866-384-8432).
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean, dry cloths to
remove dirt, dust, oil, grease, etc.
Keep all safety devices, air vents, and the motor housing free of dirt and dust.
Regularly clean the ventilation slot in your grass trimmer using a soft brush or dry cloth.
Regularly clean the cutting line and spool using a soft brush or dry cloth.
Regularly remove grass and dirt from the underside of the guard using a blunt scraper.
23
To Next Page
Loading...
Need help?
General
