LDG FT-meter User Manual

Installation
The FT-Meter is intended for indoor use only; it is not water resistant. If you use it outdoors
(packing up Mount Everest, for example) you must protect it from rain.
Position your FT-Meter in a convenient spot on your operating position, anywhere within reach
of its six-foot cable. Plug the cable into your transceiver as follows:
The meter jack on the FT-857 is located on the bottom of the front panel, under the FUNC button
on the left.
6

LDG FT-meter Specifications

General

Brand	LDG
Model	FT-meter
Category	Measuring Instruments
Language	English