Need help?Do you have a question about the LDG RT-100 and is the answer not in the manual?
General| Connectors | SO-239 |
|---|---|
| Input Impedance | 50 Ohms |
| Output Impedance | 50 Ohms |
| Type | Automatic tuner |
| Frequency Range | 1.8 to 54 MHz |
| Power Handling | 100 W |
| Power Requirements | 13.8 VDC, 500 mA |
| Weight | 1.5 lbs |
| SWR Range | Up to 10:1 |
| Voltage Standing Wave Ratio (VSWR) | 1:1 to 10:1 |
Initial setup and connection steps for the RT-100 tuner, for immediate use.
Crucial warning about exceeding the RT-100's maximum power input to prevent damage.
Essential safety advice for antenna installation near power lines to prevent injury or death.
Description of the optional RC-100 controller and its functions for the RT-100.
Step-by-step guide for connecting the RT-100 system with a bias tee for power and RF.
How to initiate and monitor the RT-100's automatic memory tuning process.
Method to manually trigger a full tuning cycle for optimal antenna matching.
Guidelines for cleaning, protecting, and obtaining technical assistance for the RT-100.
Details the RT-100's two-year transferable warranty and registration process.
To Next Page
