General Information 2-1
2. General Information
2.1 Product Assistance
Help on installation, calibration, and the use of LeCroy equipment is available from your
local LeCroy office, or from LeCroy’s
• Customer Care Center, 700 Chestnut Ridge Road, Chestnut Ridge,
New York 10977–6499, U.S.A., tel. (845) 578–6020
• European Service Center,
4, Rue Moïse Marcinhes, 1217 Meyrin 1, Geneva
Switzerland, tel. (41) 22/719 21 11.
• LeCroy Japan Corporation, Sasazuka Center Bldg – 6
th
floor, 1-6, 2-Chome,
Sasazuka, Shibuya-ku, Tokyo Japan 151-0073, tel. (81) 3 3376 9400
2.2 Installation for Safe and Efficient Operation
Operating Environment
For safe operation of the instrument to its specifications, ensure that the operating
environment is maintained within the following parameters:
Temperature ............. 5 to 40 °C (41 to 104 °F) rated.
Humidity.................... Maximum relative humidity 80 % RH (non-condensing) for
temperatures up to 31 °C decreasing linearly to 50 % relative
humidity at 40 °C
Altitude...................... < 2000 m (6560 ft)
The oscilloscope has been qualified to the following EN61010-1 category:
Installation (Overvoltage) Category ........................ II
Protection Class..........................… ........................ I
Pollution Degree ......................... ............................ 2
To Next Page
Loading...
Need help?
General
