Lennox BAH 085 DNM 3M User Manual

• 80 •


*:
:
:
:
- :
• 
• 
 :
• 
:
• 
:
• :
• :
• *:
• *:
• *:
• *:
BALTIC-IOM-0412-E / Control manual
USE
Number of rooftop connected to the DC60
Predetermined temperature set point current mode (°C)
Volatile temperature set point current mode (°C)
Alarms code
Outdoor temperature (°C)
Supply temperature (°C)
Indoor (Room) temperature (°C)
Indoor (Room) humidity (%hr)
Indoor (Room) Air quality (ppm)
Opening of fresh air damper (%)
Available if the option is enabled.
Available if the level 2 is activated.
Adjustable with ‘DC60.
Volatile temperature set point current mode (°C)
Indoor (Room) temperature (°C)
Information available
By rotating the knob , you can view or modify the following values:
This item can know the number of rooftop connected to the DC60.
This item allows you to view and/or modify the control temperature required for the Roof-Top selected.
If this point is changed, this value is used until the scheduling changes mode (A, B, C, D, BMS).
At each change of the mode, the CLIMATIC™ 60 sets the value of this set point on the preset value in the mode concerned.
Unit connected
DC60 set in light mode
DC60 set in full mode
Volatile Temperature set point
Indoor (room) temperature
This item indicates the measured air temperature in the room conditioning.
The room temperature isn't available if the CLIMATIC™ 60 is confi gured to supply control.
DISPLAY DC60

Lennox BAH 085 DNM 3M Specifications

General

Brand	Lennox
Model	BAH 085 DNM 3M
Category	Air Conditioner
Language	English