Page 2
Installation Clearances
See
NOTES
See NOTES
See NOTES
See
NOTES
CONTROL
BOX
NOTES:
Service clearance of 30 in. (762 mm) must be maintained on
one of the sides adjacent to the control box.
Clearance to one of the other three sides must be
36 in. (914 mm)
Clearance to one of the remaining two sides may be
A clearance of 24 in. must be maintained between two units.
48 in. (1219 mm) clearance required on top of unit.
Model Number Identication
Nominal Cooling Capacity
024 = 2 tons
036 = 3 tons
048 = 4 tons
060 = 5 tons
ML 18 X C 2 - 036 - 230 A 01
Nominal SEER
Refrigerant Type
X = R-410A
Revision Level
Voltage
230 = 208/230V-1 phase-60hz
Product Tier
ML = Merit
®
Series
Unit Type
C = Air Conditioner Unit
Cooling Stages
2 = Two Stage Compressor
Ratings Revision Level
To Next Page
Loading...
Need help?
General