Page 30
MS8C / MS8H (208-230V)
Wireless Remote Functions (Continued)
TEMP button
Use the TEMP button to change
the temperature display shown
on the remote control. When ini
tially powered on, the current
temperature setting is displayed,
along with the icon.
Press the TEMP button once
to alter the display to show the
current indoor ambient tempera
ture, along with the icon. The
indoor temperature sensor is in
the indoor unit.
Press the TEMP button again to
display the outdoor ambient tem
perature icon. The outdoor
ambient temperature display is
not available on this system.
On occasion, the remote control
will display the temperature that
was not selected (indoor ambient
temperature or setting tempera
ture). The selected temperature
will return to the display screen
after 5 seconds.
NOTE - The TEMP button can
also be used to temporarily dis
play the indoor ambient tempera
ture on the indoor unit display
panel.
LIGHT button
Use the LIGHT button to turn the
indoor unit display light on and
off. When the light is on, the
icon appears on the remote con
trol.
REMOTE LOCK
Press - and + buttons simulta
neously to either lock or unlock
the remote control buttons. When
locked, the icon is
displayed.
TIMER ON button
Use the TIMER ON button to ini
tiate or cancel a single timed-on
event. Use this feature to bring
the system on just before you re
turn home or just before you
wake in the morning.
Press the TIMER ON button
once. The clock icon
disappears and a time setting ap
pears with the word ON flashing
at the right. Use the - and + keys
to adjust the time setting to the
desired time for the system to
begin operation. Press the TIM
ER ON button again to
accept the setting. When suc
cessfully set, the word ON will
appear to the right of the current
time display. Press the TIMER
ON button again if you want to
cancel the timed-on event.
TIMER OFF button
Use the TIMER OFF button to
initiate or cancel a single timed-
off event. Use this feature to turn
the system off just after you
leave the house or just after you
go to bed at night.
Use the same method
described above to set the de
sired time for the system to stop
operation. When successfully
set, the word OFF will appear to
the right of the current time dis
play. Press the TIMER OFF but
ton again if you want to cancel
the timed-off event.
To Next Page
Loading...
Need help?
General
