24
Menu
Select the Menu button on the Home screen to display the Menu screen.
If multiple thermostat control systems are available they will be shown below
the General menu settings.
General
Notications
Filters for displaying notications are All Notications (options that can be
checked off are All Notication, Service Urgent and Maintenance) The
second lter option is All Time Periods and the selection options are All
Time Periods, Last 24 hours, Last 30 days and Last 12 months.
User Account
This section is only accessible if the thermostat has an active connection to
Wi-Fi. On this screen homeowners have the option to sign into an existing
account or create a new account.
Also available is the Generate Pin option if setting up an account using the
Lennox Smart Thermostat App.
Once the account has been created and thermostat added to that account,
then information under this section can be edited at any time.
Selecting User Account directs homeowners to the User Settings screen.
Homeowners can select their Email (>) to view and edit information such
as correct First and Last Name, Change Phone Number, Email and
Password, View EULA and toggle on Email Updates and Monthly Report
Email (System Performance Information).
There is also a option to Move Out at the bottom of the User Settings
screen. Selecting this option will remove the thermostat from the Lennox
account. This would be done typically if the home is being sold or the
homeowner is replacing the thermostat.
Display Settings
The available settings are:
• Auto Brightness with an option for either ON or OFF. When set to OFF,
there is an adjustment bar to set the brightness level.
• Screen Lock with an option Unlocked, Partially Locked, and Locked.
Press and hold the lock icon for 3 seconds
to unlock (Partially Locked and Locked)
Figure 6. Unlocking
NOTE: Lock screen can also be used to clean the thermostat screen.
• Proximity Sensor which is ON by default. When set to ON, the display
will automatically turn on when approached. When set to OFF, users must
touch the screen to activate it.
• Screen Saver which by default is set to OFF. Options are OFF, Weather,
Power Save (blank screen) and photo. Photo can be upload to the
thermostat by using the Lennox
®
S40 Smart Thermostat app.
» Use the Lennox Thermostat App, select Menu > Display Settings
> Screensaver and upload an image from this screen. If the upload is
successful a conrmation screen will indicate so.
» From the thermostat Home screen, select Menu > Display Settings
> and turn on Screensaver and then select Photo. The photo you just
uploaded from the Lennox Smart Thermostat App should appear
and ask you to accept or reject. Select accept to use the picture as a
screensaver.
• Home screen settings are:
» Outdoor Temperature by Source. Options are Accuweather or
outdoor temperature sensor. Default setting is Accuweather. To
display Accuweather, there must be a good Wi-Fi and Lennox server
connection. Also, the homeowner must be logged into their user
account.
» Outdoor Weather. This options allows the homeowner to turn on or off
outdoor weather on the Home screen.
To Next Page
Loading...
Need help?
General
