Page 39
XP21
Table 14. Fan Motor Control Flash and Pause Durations
Flash or Pause State Duration
Flash Flash Three flashes per second
Slow Flash One flash per second
Short Pause Two seconds of OFF time.
Long Pause Five seconds of OFF time.
Table 15. Fan Motor Control Error/Fault LED Codes
Unit Status Motor Control LED Possible Cause
Mismatched RPM Fast Flash with no pause Internal feedback, PWM does not match target.
CRC Failure Constant ON. Microcontroller CRC failure.
Table 16. Fan Motor Control Stage Operation LED Indicator Codes
Unit Status Unit Status Motor Control LED
Two Stage Operation
Low Stage ECM1/Y1 ONLY One slow flash, then short pause.
High Stage ECM1/Y1 and ECM2/Y2 Two slow flash, then short pause.
EDA Operation ECM2/Y2 ONLY Three slow flash, then short pause.
Table 17. Multi−Stage Fan Motor Control RPM Jumper Settings, LED RPM Indicator and P2 DC
Voltage Outputs
Application
CFM Profile Pin Select
Low Stage ECM1/Y1
Only
High Stage ECM1/Y1
and ECM2/Y2
EDA Operation
ECM2/Y2 Only
4 3 2 1 RPM
LED
Code
DC
Volt
RPM
LED
Code
DC
Volt
RPM
LED
Code
DC
Volt
XP21−024 ON ON OFF ON 425 6 13.6 500 7 16.0 200 3 6.3
XP21−036 ON OFF ON ON 525 7 16.8 600 8 19.2 225 3 7.0
XP21−048 ON OFF OFF ON 600 8 19.2 675 9 21.6 225 3 7.0
XP21−060 ON OFF OFF OFF 625 8 20.0 700 10 22.5 225 3 7.0
* LED Code indicates Fan Motor Control LED flash sequence. For example, LED Code 9 indicates 9 slow flashes and pause.
To Next Page
Loading...
Need help?
General