Chapter 2. 2-3
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On-Screen Display (OSD) is not displayed.
Icon Control Description
1
Input Source
Switches the video input source
Shift back to previous level when in OSD mode
DDC-CI
Press and hold for 10 seconds to enable or disable the
DDC-CI function
Exit Exit and return to previous level
2
Auto Adjustment
Optimizes image (size, position, phase and clock) (For
analog [VGA] source only)
Increase
Press to move to last item on menu.
Press to Increase current value on adjustment bar.
3
Brightness Direct access to Brightness adjustment
Enable Low Blue Light
Press and hold for 3 seconds to enable Low Blue Light
Disable Low Blue Light
Press and hold for 3 seconds to disable Low Blue Light
Decrease
Press to move to next item on menu.
Press to decrease current value on adjustment bar.
4
Menu
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/un-lock
menu
Enter
Press to enter next level on main menu/sub menu status
or enter previous level on adjustment bar
To Next Page
Loading...
Need help?
General
