Chapter 3 Reference information 3-1
Reference information
This section contains monitor specifications, instructions to manually install the monitor driver,
troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications
Dimensions
Height
Depth
Width
444.42 mm (17.49 in.)
231.22 mm (9.10 in.)
614.11 mm (24.17 in.)
Stand Tilt range Range: -5°/+22°
VESA mount
Supported
(UL & GS approved)
100 mm (3.94 in.)
Image
Viewable image size
Maximum height
Maximum width
Pixel pitch
684.6 mm (27 in.)
335.6 mm (13.21 in.)
596.7 mm (23.49 in.)
0.2331 mm (0.0092 in.) (V)
Power input
Supply voltage
Max supply current
100-240 VAC, 60/50 Hz
1.5A
Power consumption
Max Consumption
Typical Consumption
Standby/Suspend
Off
35 W
28 W
0.5 W
0.3 W
Video input (Digital)
Input signal
Horizontal addressability
Vertical addressability
Clock frequency
DP
2560 pixels (max)
1440 lines (max)
245 MHz
Input signal
Horizontal addressability
Vertical addressability
Clock frequency
HDMI
2560 pixels (max)
1440 lines (max)
245 MHz
Aspect Ratio Size ratio 16:9
Communications VESA DDC CI
Altitude Test Operation 40000 ft
Supported Display Modes
(VESA Standard modes
between noted ranges)
Horizontal frequency
Vertical frequency
Native Resolution
30 kHz – 90 kHz
50 Hz – 75 Hz
2560 x 1440 at 60 Hz
Temperature
Operating
Storage
Shipping
0° to 40°C (32°F to 104° F)
-20° to 60°C (-4°F to 140° F)
-20° to 60°C (-4° F to 140° F)
Humidity
Operating
Storage
Shipping
10% to 80%
5% to 95%
5% to 95%
To Next Page
Loading...
Need help?
General
