4
KFZ_Zeichen_EN−M−Install_WiHis_3200C
Lenze ¯ MA_3200_C ¯ 8.0
¸
, Please read these instructions and the controller reference manual before you
start working.
Observe the provided safety instructions!
I Tipp!
Information and tools concerning the Lenze products can be found in the
download area at
www.lenze.com
These instructions are valid for:
Cabinet Controller 3221 C / 3231 C / 3251 C
Application as directed
The Controller is an electrical equipment ...
ƒ for installation into control cabinets or similar closed electrical operating areas;
ƒ for implementing control and operating concepts or for presenting information in
usual industrial and commercial fields.
Max. operation ambient temperature 3221 C 3231 C 3251 C
According to EN 60721−3−3: 3K3
horizontal mounting
vertical (upright) mounting
55 °C
50 °C
50 °C
45 °C
According to UL ^ 10
A different use, or one beyond these purposes, is not permissible!
For the purpose of preventing injury to persons and damage to material assets, higher−level
safety systems have to be used!
Open source notice
Lenze Software may contain software elements that are licensed as free software or open
source. The licensing terms and conditions of the open source software components used
in this product can be found in the "License" directory on the SD card included in the pro-
duct.
To Next Page
Loading...
Need help?
General
