Lenze 7812 User Manual

checked:
ET4 6 /f a
19.04.89 MB 33.0831 GB
page: 10
5.12 Frecruericv
a) Analogue
b 1 Digital
OMEM
885
M ~7
C2H1-
4~1
5
- An analogue measuring instrument
can be connected (Ri = 10km)
which is used to monitor:
0 — 10V tor 0 + 60HZ
or 0 — 10V tor 0 — 120Hz
Adjustment using trlmmer ADJ
— A suitable measuring instrument is
a VSC analogue meter, part no. 326 893
- A digital display device can also
be connected giving:
=
24xfD at ~D~{AX 50Hz or 60Hz
~FM = l2XfD at tDI
4AX=lOOHz or 120Hz
~FM = GXfD at fD~~<=200Hz or 240Hz
Such a suitable digital meter would
be a 322 unit, part no. 326 884
5.13 Mains connection
PE L1 L2 L3
- L1, L2, L3 three-phases
340 to 505V ± 0%.
- Semiconductor fuses and
mains chokes are speclfied In the
tables on pages 30/31.
- On-otf mains switching should be
limited to once in every 3 minutes.
lt the motor must be released within periods of less than
3 minutes (e.g. jogging), the following circuit must be used.
FU 7800
Kl~j~ K2(j
K44D
= RFR
K24J
out~ut
motor Bx

Lenze 7812 Specifications

General

Brand	Lenze
Model	7812
Category	DC Drives
Language	English