Lenze L-force Communication LECOM-B User Manual

8 Diagnostics
LED status displays
EDKMF2102 DE/EN/FR 8.0
82

H1_Diagnose−Statusanzeige
8 Diagnostics
LED status displays
Pos. Colour Status Description

Green
On The communication module is supplied with voltage and has a
connection to the drive controller.
Off The communication module is not supplied with voltage. The
controller or the external voltage supply is switched off.
Blinking The communication module is supplied with voltage, but is not (yet)
connected to the controller because ...
l the communication module has not been correctly attached to the
controller;
l data transfer to/from the controller is not yet possible (e.g.
controller is in initialisation mode).

Yellow Blinking The controller receives a telegram.

Yellow Blinking The controller sends a telegram.

Red /
green
On /
blinking
The red and green drive LEDs indicate the operating status of the 82XX,
8200 vector, 93XX, 9300 Servo PLC and Drive PLC standard device (see
operating instructions for the standard device).

Lenze L-force Communication LECOM-B Specifications

General

Brand	Lenze
Model	L-force Communication LECOM-B
Category	Control Unit
Language	English