Levoit Core 200S Series User Manual

13
1. Unplug the air purifier. Flip the air purifier
over and remove the filter cover (see
Getting Started, page 6).
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.2]
4. Unwrap the new filter and place it into
the housing (see Getting Started,
page 6).
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator (see
page 12).
Replacing the Filter
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Storage
Check the VeSync app to see your
remaining filter life.
The filter should be replaced every
6–8 months. You may need to replace
your filter sooner or later depending
on how often you use your air purifier.
Using your air purifier in an environment
with relatively high pollution may mean
you will need to replace the filter more
often, even if is o.
You may need to replace your filter if
you notice:
• Increased noise when the air
purifier is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter
When Should I Replace the
Filter?
Note:
• To maintain the performance of your
air purifier, only use ocial Levoit
filters. To buy replacement filters, visit
Levoit’s online store. Go to levoit.com
for more information.
• Remember to reset after changing
the filter (see page 12).
CARE & MAINTENANCE (CONT.)
Figure 3.2

Levoit Core 200S Series Specifications

General

Brand	Levoit
Model	Core 200S Series
Category	Air Cleaner
Language	English