EN
8
CARE & MAINTENANCE
Cleaning the Air Purifier
1. Unplug before cleaning.
Figure 2.1
Check Filter Indicator
will light up as a reminder to check the filter.
Depending on how often you use the air purifier,
the indicator should turn on after about 4–6
months. You may not need to change your filter
yet, but you should check it when turns on.
Note: Do not clean with abrasive chemicals or
flammable cleaning agents.
2. Wipe the outside of the air purifier with a
soft, dry cloth. If necessary, wipe with a
damp cloth, then immediately dry.
3. Vacuum the inside of the air purifier using
a vacuum hose with a crevice attachment.
[Figure 2.1]
Resetting the Check Filter
Indicator
When the lights up red or if you want to
change the filter before the lights up, do
the following to reset the Check Filter Indicator:
1. Replace the filter (see page 9).
2. With the air purifier plugged in and the
fan turned on, press and hold the Control
Button for 3 seconds to turn it o.
3. With the air purifier turned o, press and
hold the Control Button for 3 seconds.
4. will blink 3 times and turn o when
successfully reset.
Cleaning the Filter
The outer pre-filter should be cleaned every
2–4 weeks to increase eciency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. Do not clean the filter
with water or other liquids.
Filter When to Clean How to Clean
When to
Replace
Pre-Filter
Every 24
weeks
Use a soft brush or vacuum
hose [Figure 2.1]
4–6 months
Personal HEPA &
Activated Carbon Filter
Do not clean
To Next Page
Need help?
General
