Levoit LUH-A602S User Manual

CARE & MAINTENANCE CONT.
Reassembling
1. Place the float back into the base
chamber: [Figure 5.9]
a. Make sure the correct side of the
float is facing up.
b. Insert the smaller prong into the
closed side of the float brackets.
c. Place the larger prong into the
open (U-shaped) side of the float
brackets.
2. Place the absorption pad and the noise
silencer back over the heating element.
[Figure 5.10]
3. Screw the mist tube back onto the mist
channel by twisting the tube clockwise.
Place securely into place back over the
base chamber. [Figure 5.10]
4. Place the outer water outlet valve back
onto the tank by rotating it. [Figure 5.11]
5. Make sure the water filter sponge is
securely placed inside the water filter.
Place the water filter back into the tank
and rotate it clockwise to secure it in
place. [Figure 5.12]
6. Refill the tank, if necessary. Place the
tank properly on the base and place the
tank cover on the water tank.
Storing
Follow the cleaning instructions (see page
17) and allow all parts to dry completely
before storing. Store in a cool, dry location.
Figure 5.9
Figure 5.10
Figure 5.11
Figure 5.12
EN
21

Levoit LUH-A602S Specifications

General

Brand	Levoit
Model	LUH-A602S
Category	Humidifier
Language	English