9
GETTING STARTED
1. Place the humidifier on a flat, level,
elevated, and water-resistant surface,
such as a table or nightstand. Make sure
the room is well-ventilated.
Note:
• Position the humidifier at least 12
in / 30 cm away from walls and
appliances to prevent them from
getting wet. [Figure 2.1]
• Do not place the humidifier directly
on floors, carpets, or rugs.
Note:
• We recommend using purified or
distilled water in the humidifier.
• Do not use hot water.
• Do not add water through the
nozzles, mist tube, or into the inner
chamber of the base. This may
damage the humidifier.
• Do not add essential oils into the
water tank or base. Only add
essential oils to the aroma pads.
Figure 2.1
Figure 2.2
Figure 2.3
2. Remove the nozzle cap from the water
tank. Use the handle to remove the water
tank from the base. [Figure 2.2]
3. Flip the tank over and twist the water
tank cap counterclockwise to remove it.
[Figure 2.3]
4. Pour water into the opening. Fill the
tank at least halfway with cold or room
temperature water. The maximum
capacity is 1.5 gal / 5.6 L.
Direct the nozzles away from
walls and appliances.
12 in /
30 cm
12 in /
30 cm