Levoit LV600S Series User Manual

7
CONTROLS
On/O Button
• Press to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect it
from Wi-Fi® and the VeSync
app (see page 10).
Mist Level Button
• Press repeatedly to cycle
through mist level settings:
low, medium, and high mist.
• Press and hold for 3
seconds to turn the display
o. Press any button to turn
the display back on.
Warm Mist Button
• Cycles through warm mist
settings: low heat, medium
heat, high heat, and heat
o (see page 12).
Humidity Level Button
• Sets the relative humidity
(RH) percentage. The
humidifier will automatically
stop misting when the room
reaches the target humidity
level (see page 12).
• Press and hold for 2
seconds to cancel your
humidity level setting.
Timer Button
• Sets or cancels a timer
(see page 13).
Sleep Mode Button
• Press to turn Sleep Mode
on/o (see page 13).
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
No Water Indicator
• Blinks when there is no
water in the tank. After
this indicator blinks 10
times, the humidifier will
turn o. Refill the tank
and properly place it
on the base to use your
humidifier.
• Lights up when the
water tank is removed.
Remains on until the tank
is replaced.
Note: You can also use the VeSync app to control these functions, as well as additional
app-only features (see page 15).

Levoit LV600S Series Specifications

General

Brand	Levoit
Model	LV600S Series
Category	Humidifier
Language	English